Drill results continue to build confidence in 1.84 Moz MRE
Released
Released
Announcement PDF
P: +61 8 6466 7500
E: info@ballardmining.com.au
A: Level 2, 18 Richardson Street,
West Perth WA 6005
ASX: BM1
ballardmining.com.au
ASX Announcement – 18 November 2026
Drilling Results Build Confidence in Mt Ida's 1.84 Moz
Gold Resource
• Strong results from extensional and resource-definition (infill)
drilling across Mt Ida has increased the drill density and geological
confidence within key Mineral Resource areas
• Kestrel, located on the Ballard shear hosts a Mineral Resource
Estimate (MRE)1
of 53 koz at 1.6 g/t. Recent drilling has intersected
broad, shallow mineralisation with results including:
o 32m at 2.4 g/t Au from 59m in KSGC009;
o 27m at 1.3 g/t Au from 60m in KSGC007;
o 3m at 11.2 g/t Au from 15m in KSGC013;
o 12m at 1.7 g/t Au from 20m in KSGC014;
o 5m at 3.5 g/t Au from 4m in KSGC015;
o 5m at 3.4 g/t Au from 45m in KSGC014
o 8m at 1.9 g/t Au from 41m in KSGC004;
o 3m at 4.6 g/t Au from 69m in KSGC004; and
o 7m at 1.9 g/t Au from 25m in KSGC013
• The cornerstone Baldock deposit has a MRE1
of 1.36 Moz at 3.5 g/t.
Recent drilling has intersected mineralisation outside the current
MRE and within the current open-pit optimisation shell, including:
o 7m at 2.5 g/t Au from 77m in BMRD020;
o 5m at 3.2 g/t Au from 21m in BMRD021;
o 3m at 4.6 g/t Au from 155m in BMRD039; and
o 3m at 3.8 g/t Au from 290m in BMRD022
• Phase 1 infill drilling programs have been completed at Kestrel,
and Golden Vale and is ongoing at West Knell
• An updated MRE incorporating infill and extensional drilling
results since the last MRE drilling cut-off date of 30 June 20261
is
anticipated to be updated in H1 2027
1
Refer to the Company’s ASX Announcement dated 23 September 2026 and Appendix A for further information
2
ASX: BM1
ballardmining.com.au
Commenting on Mt Ida’s active drilling programs, Managing Director Paul Brennan said:
"These results are a further validation of our Mt Ida drilling strategy. This calendar year we have
grown the global MRE and targeted the regional deposits as potential satellite open pit feed
material to supplement the cornerstone Baldock deposit. This strategy has the potential to
support a higher overall production rate at Mt Ida by providing multiple potential ore sources to a
centrally located processing plant.
With the favourable update to multiple regional deposits in the September MRE, we commenced
infill drilling programs at Kestrel, Golden Vale and West Knell targeting potential conversion of the
Inferred Resources to Indicated Resources. The infill program at Kestrel has provided some of
the widest intersections across the project to date.
We are continuing to grow the current 1.84 Moz Resource2
as well as systematically increase
Resource confidence and support potential conversion of Inferred Resources to the Indicated
category for mine planning, Ore Reserve estimation and feasibility studies.”
Ballard Mining (ASX:BM1) (“Ballard” or “the Company”) is pleased to provide an update on
recent extensional and resource-definition drilling at the Mt Ida Gold Project (“Mt Ida” or “the
Project”).
The Mt Ida Gold Project is located 540km northeast of Perth in the Goldfields Region of Western
Australia (Figure 1). Mt Ida Gold covers 26km of prospective Greenstone belt, folded around the
Copperfield Granite (Figure 2).
Ballard is pursuing a dual stream Resource Growth and Project Development strategy. The
Company’s focus for CY2026 has been Resource Growth at the cornerstone 1.36 Moz at 3.5 g/t
gold Baldock Mineral Resource Estimate (MRE)2
and from satellite feed sources to support a
standalone operation at Mt Ida.
During September and October 2026, extensional and resource-definition drilling was
undertaken at Baldock and Kestrel (Figure 2). Drilling consisted of 40 drill holes for 6,876 metres.
A full table of assay results is set out in Appendix B. Drill results are discussed below.
Infill drilling increases geological confidence
Ongoing extensional and resource-definition drilling program at Mt Ida is continuing to produce
positive results.
The current program forms part of Ballard's strategy to increase confidence in the recently
updated Mt Ida MRE of 20.4 Mt at 2.8 g/t Au for 1.84 Moz2
through systematic infill drilling of key
Mineral Resource areas.
The drilling is designed primarily to increase drill density and improve confidence in geological
and grade continuity, supporting assessment of the current Inferred Mineral Resources for
potential conversion to the Indicated category.
2
Refer to the Company’s ASX Announcement dated 23 September 2026 and Appendix A for further information
3
ASX: BM1
ballardmining.com.au
Figure 1 - Ballard’s Mt Ida Gold Project, located in Western Australia’s Goldfield Region.
In accordance with the Company's established MRE classification criteria, Indicated Resources
require greater confidence in drilling density and geological and grade continuity than Inferred
Resources. At Baldock, for example, Indicated Resources are supported by nominal drill spacing
of approximately 40m by 20m or better to 40m by 40m, together with demonstrated geological
and grade continuity.
Importantly, these assay results do not represent a updated MRE and should not be interpreted
as such. Updated classifications, tonnes, grades and ounces can only be determined following
incorporation of the drilling into the geological interpretation and completion of the applicable
Mineral Resource Estimation process.
4
ASX: BM1
ballardmining.com.au
Figure 2 – Mt Ida Project showing Baldock and existing gold resources at satellite prospects proximal to the regionally
significant Copperfield Granite.
5
ASX: BM1
ballardmining.com.au
Kestrel Infill Drilling Identifies Broad Mineralised Intervals
Kestrel is located on the Ballard Shear zone immediately east of West Knell and 7km north-east
of Baldock. The Kestrel infill program has delivered particularly strong results, including broad
mineralised intervals across several closely spaced holes. The standout intersection is 32m at
2.4 g/t Au from 59m in KSGC009 (Figures 3-4), supported by 27m at 1.3 g/t Au from 60m in
KSGC007 (Figure 5).
Additional results include:
• 3m at 11.2 g/t Au from 15m in KSGC013;
• 12m at 1.7 g/t Au from 20m in KSGC014;
• 13m at 1.5 g/t Au from 11m in KSGC011;
• 5m at 3.5 g/t Au from 4m in KSGC015;
• 5m at 3.4 g/t Au from 45m in KSGC014;
• 8m at 1.9 g/t Au from 41m in KSGC004;
• 3m at 4.6 g/t Au from 69m in KSGC004; and
• 7m at 1.9 g/t Au from 25m in KSGC013.
Mineralisation occurs as a subvertical series of mineralised lenses occurring within volcanic
sediments and felsic porphyries sandwiched between ultramafic units and surrounding basalts.
Mineralisation extends north-south and occurs over 1500 metres with the widest zone occurring
as a dilational jog associated with north-east trending faults. Mineralisation remains open at
depth with drilling to date targeting depths of only 150 metres.
The September MRE reports Kestrel at approximately 1.02 Mt at 1.6 g/t Au for 53 koz3
, entirely in
the Inferred category. Accordingly, the key objective of the current Kestrel drilling is to increase
geological and grade-continuity confidence sufficient to support assessment for a higher-
confidence Mineral Resource classification.
The current Infill drilling program is complete, and the Company is awaiting thefinal assay results
prior to finalising the geological model in preparation for an updated Mineral Resource Estimate.
3
Refer to the Company’s ASX Announcement dated 23 September 2026 and Appendix A for further information
6
ASX: BM1
ballardmining.com.au
Figure 3 – Plan view of the recent infill drilling at the Kestrel deposit showing geology and gold lodes.
7
ASX: BM1
ballardmining.com.au
Figure 4 – Cross section of drill holes KSGC008 and 009 showing mineralised intervals, ore lodes and geology
8
ASX: BM1
ballardmining.com.au
Figure 5 - Cross section of drill holes KSGC007 showing mineralised intervals, ore lodes and geology
9
ASX: BM1
ballardmining.com.au
Figure 6 - Cross section of drill holes KSGC013 and 014 showing mineralised intervals, ore lodes and geology
Baldock drilling identifies more mineralisation within the open pit shell
The resource extension program at Baldock continues to intersect gold mineralisation outside
the current 1.36 Moz Mineral Resource and within the existing open pit optimisation shell.
Significant results include:
• 7m at 2.5 g/t Au from 77m in BMRD020;
• 5m at 3.2 g/t Au from 21m in BMRD021;
• 3m at 4.6 g/t Au from 155m in BMRD039;
• 3m at 3.8 g/t Au from 290m in BMRD022;
• 5m at 1.7 g/t Au from 347m in BMRD023;
• 1m at 8 g/t Au from 186m in BMRD020;
• 1m at 7.3 g/t Au from 306m in BMRD023; and
• 4m at 1.7 g/t Au from 258m in BMRD040.
The extensional drill results above add to the results from Vortex, a newly identified lode
announced in October 20264
, that sits just inside the wall of the current pit optimisation. These
results will be incorporated into the next geological interpretation and Mineral Resource
4
Refer to the Company’s ASX Announcement dated 28 October 2026 for further information
10
ASX: BM1
ballardmining.com.au
Estimation process. Any resulting changes to tonnes, grade, contained ounces or Mineral
Resource classification will be determined through that process.
This is particularly important at Baldock, where the current MRE totals 12.2 Mt at 3.5 g/t Au for
1.36 Moz5
including 437 koz of open-pit Resources in the Indicated category at 3.9 g/t Au5
.
Additional infill drilling is scheduled for February 2027 to test an area within the optimised pit
shell that has not been drilled due to access constraints associated with historical plant
infrastructure.
5
Refer to the Company’s ASX Announcement dated 23 September 2026 and Appendix A for further information
11
ASX: BM1
ballardmining.com.au
Figure 7 – Plan view of the Baldock deposit showing recent drill locations, gold lodes and geology. Inset map shows
detail
12
ASX: BM1
ballardmining.com.au
Figure 8 – Cross section of drill holes BMRD020-024 showing mineralised intervals, ore lodes and geology.
Phase 1 Infill Program complete at Golden Vale and underway at West Knell
An initial 20,000m infill drilling program has been completed at Golden Vale designed to support
assessment of theexisting Inferred MineralResource of 124koz6
@ 1.6g/t for potential conversion
to the Indicated category.
Three RC rigs and a diamond rig are currently drilling a planned 40,000m infill program at West
Knell designed to support assessment of the existing Inferred Mineral Resource of 147koz6
at
2.6g/t for potential conversion to Indicated category. (Figure 9). This program is due for
completion in January 2027.
6
Refer to the Company’s ASX Announcement dated 23 September 2026 and Appendix A for further information
13
ASX: BM1
ballardmining.com.au
Figure 9 - 3 x RC Rigs and 1 x diamond drill undertaking infill program at West Knell
Project Background
The Mt Ida Gold Project hosts a Mineral Resource Estimate totalling 20.4 million tonnes @ 2.8 g/t
Au for 1.84 million ounces of contained gold (Indicated and Inferred). The Baldock deposit, which
hosts 1.36 Moz @ 3.5 g/t, forms the basis for initial development opportunities at Mt Ida.
The Project includes seven granted Mining Leases with key mining approvals in place including,
an approved Mining Proposal, Mine Closure Plan and Native Vegetation Clearing Permit.
Mining approvals are in place for both open pit and underground mining at the Baldock deposit.
A Works Approval for up to 2.0 Mtpa Processing and Tailings Storage Facility has been received
as well as granted 3.7 GL/yr water abstraction licences.
-END-
This release is authorised by the Board of Directors of Ballard Mining Limited.
Company contacts:
PAUL BRENNAN TIM MANNERS
Managing Director Executive Director
info@ballardmining.com.au
MICHAEL VAUGHAN
Fivemark Partners
michael.vaughan@fivemark.com.au
14
ASX: BM1
ballardmining.com.au
About Ballard Mining
Ballard Mining Limited (ASX: BM1) is an exploration and development company focused on advancing its Mt Ida Project towards
production. With current JORC compliant resources of 20.4Mt @ 2.8 g/t Au, strong balance sheet and an experienced team driving
the project development, Ballard is pursuing a growth and development strategy.
The Mt Ida Project has high grade gold resources with 93% located on granted mining leases. The main Baldock area has received
full open cut and underground mining approvals witha Works Approvalfor a 2.0 Mtpa Processing Plant and Tailings Storage Facility.
Ballard is rapidly advancing the Mt Ida Project through a dual stream plan to increase confidence in the current MRE and increase
the global resource inventory via an aggressive exploration program. All modifying factors will be advanced simultaneously.
Competent Person's Statement
Information in this announcement that relates to exploration results is based upon work undertaken by Mr Todd Hibberd, a
Competent Person who is a Member of the Australasian Institute of mining and Metallurgy (AusIMM). Mr. Hibberd has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is
undertaking to qualify as a ‘Competent Person’ as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves’ (“JORC Code”). Mr. Hibberd consents to the inclusion in this announcement of the
matters based on his information in the form and context in which it appears.
The Mineral Resource estimates reported in this announcement have been previously prepared and disclosed by Ballard in
accordance with the JORC Code in its ASX announcement titled "Mt Ida Gold Resource increases 56% to 1.84 Moz" dated 23
September 2026. The Company confirms that it is not aware of any new information or data that materially affects the information
included in the aforementioned ASX announcement. The Company confirms that the form and content in which the Competent
Person's findings are presented here have not been materially modified from the aforementioned ASX announcement, and all
material assumptions and technical parameters underpinning Mineral Resource estimates in the aforementioned ASX
announcement continue to apply and have not materially changed.
Disclaimer
This announcement may contain forward-looking statements regarding the Company and its subsidiaries (including its projects).
Forward-looking statements may in some cases be identified by terminology such as “may”, “will”, “could”, “should”, “expect”,
“plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict”, “potential” or “continue”, the negative of such terms or other
comparable terminology. These forward-looking statements are only predictions. These forward-looking statements reflect various
assumptions by or on behalf of Ballard. Accordingly, these statements are subject tosignificant business,economic and competitive
uncertainties and contingencies associated with the mining industry which may be beyond the control of Ballard which could cause
actual results or trends to differ materially including, but not limited to, price and currency fluctuations, geotechnical factors, drilling
and production results, development progress, operating results, reserve estimates, legislative, fiscal and regulatory developments,
economic and financial market conditions in various countries, approvals and cost estimates, environmental risks, ability to meet
funding requirements, share price volatility. Accordingly, there can be no assurance that such statements and projections will be
realised.
Actual values, results or events may be materially different to those expressed or implied in this announcement. Given these
uncertainties, readers are cautioned not to place reliance on forward-looking statements. Any forward-looking statement in this
announcement is given as at the date of this announcement. Subject to any continuing obligations under applicable law and the ASX
Listing Rules, Ballard does not undertake any obligation to update or revise any information or any of the forward-looking statements
in this announcement or any changes in events, conditions or circumstances on which any such forward-looking statement is based.
15
ASX: BM1
ballardmining.com.au
Appendix A: Ballard Global Mineral Resource Estimate (September 2026)
Cutoff Deposit
Indicated Inferred Total
Tonnes Grade Ounces Tonnes Grade Ounces Tonnes Grade Ounces
(000s) g/t Au (000s) (000s) g/t Au (000s) (000s) g/t Au (000s)
Open cut
0.5g/t Au
Baldock 3,530 3.9 437 1,010 2.5 79 4,540 3.5 516
Kestrel 940 1.6 48 940 1.6 48
Golden Vale 2,363 1.6 124 2,363 1.6 124
Bombay 711 1.3 30 711 1.3 30
West Knell 1,638 2.6 138 1,638 2.6 138
Jupiter 496 1.8 29 496 1.8 29
Neptune 501 1.5 25 501 1.5 25
Pluto 289 2.9 27 289 2.9 27
Astro - Quasar 412 1.6 21 412 1.6 21
Lunar 29 2.1 2 29 2.1 2
Saturn 46 1.3 2 46 1.3 2
Tailings 500 0.5 8 500 0.5 8
Subtotal 12,465 2.4 970
Underground
1.5g/t and 1.3
g/t Au
Baldock 1,608 4.1 210 6,050 3.3 637 7,658 3.4 847
Kestrel 80 1.9 5 80 1.9 5
Bombay 30 3.1 3 30 3.1 3
West Knell 121 2.3 9 121 2.3 9
Neptune 23 2.9 2 23 2.9 2
Subtotal 7,912 3.4 866
All
Baldock 5,138 3.9 647 7,060 3.2 716 12,198 3.5 1,363
Kestrel 1,020 1.6 53 1,020 1.6 53
Golden Vale 2,363 1.6 124 2,363 1.6 124
Bombay 740 1.4 33 740 1.4 33
West Knell 1,759 2.6 147 1,759 2.6 147
Jupiter 496 1.8 29 496 1.8 29
Neptune 524 1.6 27 524 1.6 27
Pluto 289 2.9 27 289 2.9 27
Astro - Quasar 412 1.6 21 412 1.6 21
Lunar 29 2.1 2 29 2.1 2
Saturn 46 1.3 2 46 1.3 2
Tailings 500 0.5 8 500 0.5 8
Total 5,138 3.9 647 15,238 2.4 1,189 20,376 2.8 1,836
Notes:
• Open pit resources are reported within optimised pit shells based on A$4,500 per ounce gold price and reported at 0.5 g/t
Au cut-off grade.
• Underground resources are reported below optimised pits and constrained within mineralised domains in optimised
mineable shapes at 1.5g/t gold cut-off grade for Baldock, Bombay, Kestrel and 1.3 g/t for West Knell and Neptune.
• All figures are rounded to reflect appropriate levels of confidence. Apparent differences may occur due to rounding.
16
ASX: BM1
ballardmining.com.au
Appendix B: Recent Project Data
Appendix B1: Recent Exploration Significant Intercepts reported in this announcement
• Reported intersections are length-weighted averages using a 0.5 g/t Au lower cut-off, allowing up to 2 m of
internal dilution. No top cut has been applied.
• All intervals are downhole lengths; true widths are not currently known.
• Intersections are reported above a 0.5 g/t Au cut-off, allowing a maximum of 2 m of internal dilution.
• Holes labelled with NSI – no significant intersection above reporting criteria. There are no NSI results in this
announcement.
Hole ID From To Length Gold g/t Lode
KSGC009 59 91 32 2.4 Kestrel
KSGC007 60 87 27 1.3 Kestrel
KSGC013 15 18 3 11.2 Kestrel
KSGC014 20 32 12 1.7 Kestrel
KSGC011 11 24 13 1.5 Kestrel
KSGC015 4 9 5 3.5 Kestrel
KSGC014 45 50 5 3.4 Kestrel
KSGC004 41 49 8 1.9 Kestrel
KSGC004 69 72 3 4.6 Kestrel
KSGC013 25 32 7 1.9 Kestrel
KSGC005 28 45 17 0.7 Kestrel
KSGC016 62 69 7 1.4 Kestrel
KSGC019 4 16 12 0.8 Kestrel
KSGC003 33 44 11 0.9 Kestrel
KSGC012 28 36 8 0.9 Kestrel
KSGC015 28 36 8 0.9 Kestrel
KSGC014 57 67 10 0.7 Kestrel
KSGC020 52 56 4 1.7 Kestrel
KSGC016 76 84 8 0.8 Kestrel
KSGC020 41 47 6 1.1 Kestrel
KSGC017 24 27 3 2.1 Kestrel
KSGC023 11 21 10 0.6 Kestrel
KSGC006 30 35 5 1.1 Kestrel
KSGC001 14 20 6 0.9 Kestrel
KSGC024 34 40 6 0.9 Kestrel
KSGC024 1 2 1 5.3 Kestrel
KSGC018 37 40 3 1.7 Kestrel
KSGC006 13 18 5 0.8 Kestrel
KSGC015 11 15 4 1.1 Kestrel
KSGC017 0 7 7 0.6 Kestrel
KSGC007 94 97 3 1.4 Kestrel
KSGC024 23 26 3 1.3 Kestrel
KSGC022 42 49 7 0.6 Kestrel
17
ASX: BM1
ballardmining.com.au
Hole ID From To Length Gold g/t Lode
KSGC018 44 46 2 1.8 Kestrel
KSGC011 3 9 6 0.6 Kestrel
KSGC021 15 20 5 0.7 Kestrel
KSGC022 72 74 2 1.7 Kestrel
KSGC003 24 27 3 1.1 Kestrel
KSGC013 3 8 5 0.7 Kestrel
KSGC016 47 53 6 0.5 Kestrel
KSGC022 54 57 3 1.0 Kestrel
KSGC012 42 45 3 0.9 Kestrel
KSGC018 32 36 4 0.6 Kestrel
KSGC007 8 12 4 0.5 Kestrel
KSGC017 10 12 2 1.1 Kestrel
KSGC022 66 67 1 2.0 Kestrel
KSGC023 24 26 2 1.0 Kestrel
KSGC010 21 24 3 0.6 Kestrel
KSGC002 30 31 1 1.7 Kestrel
KSGC006 25 26 1 1.6 Kestrel
KSGC018 27 29 2 0.8 Kestrel
KSGC001 31 32 1 1.5 Kestrel
KSGC004 62 64 2 0.7 Kestrel
KSGC008 58 60 2 0.6 Kestrel
KSGC008 17 18 1 1.2 Kestrel
KSGC017 18 19 1 1.1 Kestrel
KSGC014 39 40 1 1.1 Kestrel
KSGC006 22 23 1 0.8 Kestrel
KSGC020 36 37 1 0.8 Kestrel
KSGC008 38 39 1 0.7 Kestrel
KSGC010 16 17 1 0.7 Kestrel
KSGC017 13 14 1 0.7 Kestrel
KSGC005 23 24 1 0.7 Kestrel
KSGC017 32 33 1 0.7 Kestrel
KSGC021 36 37 1 0.7 Kestrel
KSGC002 59 60 1 0.6 Kestrel
KSGC002 61 62 1 0.6 Kestrel
KSGC024 42 43 1 0.6 Kestrel
KSGC008 29 30 1 0.6 Kestrel
KSGC009 97 98 1 0.6 Kestrel
KSGC014 14 15 1 0.5 Kestrel
KSGC016 40 41 1 0.5 Kestrel
KSGC005 19 20 1 0.5 Kestrel
KSGC005 17 18 1 0.5 Kestrel
KSGC012 64 65 1 0.5 Kestrel
18
ASX: BM1
ballardmining.com.au
Hole ID From To Length Gold g/t Lode
BMRD020 77 84 7 2.5 Baldock
BMRD021 21 26 5 3.2 Baldock
BMRD039 155 158 3 4.6 Baldock
BMRD022 290 293 3 3.8 Baldock
BMRD023 347 352 5 1.7 Baldock
BMRD020 186 187 1 8.0 Baldock
BMRD023 306 307 1 7.3 Baldock
BMRD040 258 262 4 1.7 Baldock
BMRD039 355 364 9 0.6 Baldock
BMRD043 28 32 4 1.2 Baldock
BMRD038 103 104 1 4.6 Baldock
BMRD022 271 272 1 4.1 Baldock
BMRD020 180 182 2 1.9 Baldock
BMRD031 147 148 1 3.2 Baldock
BMRD031 314 316 2 1.4 Baldock
BMRD039 287 288 1 2.6 Baldock
BMRD039 162 164 2 1.2 Baldock
BMRD022 136 140 4 0.5 Baldock
BMRD023 121 124 3 0.7 Baldock
BMRD031 333 335 2 1.0 Baldock
BMRD043 133 135 2 0.9 Baldock
BMRD023 267 268 1 1.5 Baldock
BMRD039 345 346 1 1.2 Baldock
BMRD040 294 295 1 1.2 Baldock
BMRD031 260 262 2 0.6 Baldock
BMRD038 62 63 1 0.9 Baldock
BMRD043 71 72 1 0.8 Baldock
BMRD024 13 14 1 0.8 Baldock
BMRD026 143 144 1 0.7 Baldock
BMRD023 101 102 1 0.7 Baldock
BMRD026 85 86 1 0.7 Baldock
BMRD039 306 307 1 0.7 Baldock
BMRD040 329 330 1 0.6 Baldock
BMRD021 232 233 1 0.6 Baldock
19
ASX: BM1
ballardmining.com.au
Appendix B2: Collar Information for holes reported in this announcement
Hole ID Depth East North RL Azi Dip
BMRD020 215 252890 6779036 469 51 - 61
BMRD021 252 252832 6778997 470 52 - 61
BMRD022 354 252792 6778967 470 54 - 60
BMRD023 384 252750 6778939 471 53 - 60
BMRD024 420 252708 6778907 472 51 - 61
BMRD026 258 252763 6779014 470 51 - 60
BMRD031 366 252807 6778854 471 51 - 57
BMRD036 191 252745 6779210 470 57 - 60
BMRD037 269 252704 6779181 470 55 - 61
BMRD038 336 252665 6779154 470 53 - 64
BMRD039 408 252625 6779124 470 54 - 64
BMRD040 336 252635 6779191 470 57 - 57
BMRD041 298 252595 6779163 470 55 - 58
BMRD042 354 252552 6779135 470 56 - 61
BMRD043 420 252568 6779203 470 52 - 59
BMRD044 415 252529 6779180 470 52 - 58
KSGC001 48 259019 6783690 442 272 - 50
KSGC002 72 259037 6783689 442 273 - 55
KSGC003 60 259018 6783718 442 273 - 55
KSGC004 72 259036 6783715 442 273 - 55
KSGC005 54 259013 6783741 443 271 - 55
KSGC006 54 259008 6783765 443 273 - 54
KSGC007 114 259042 6783792 443 274 - 54
KSGC008 78 259015 6783816 444 273 - 55
KSGC009 108 259039 6783818 443 272 - 55
KSGC010 72 259006 6783842 444 271 - 50
KSGC011 42 258986 6783866 443 269 - 54
KSGC012 114 259016 6783865 443 271 - 55
KSGC013 42 258988 6783888 443 272 - 53
KSGC014 84 259012 6783890 443 268 - 55
KSGC015 42 258990 6783916 442 273 - 55
KSGC016 96 259025 6783924 443 270 - 55
KSGC017 36 258994 6783944 441 271 - 55
KSGC018 46 259016 6783942 442 269 - 55
KSGC019 35 259003 6783964 441 274 - 55
KSGC020 65 259023 6783963 441 274 - 55
KSGC021 59 259013 6783990 440 273 - 55
KSGC022 77 259030 6783986 441 271 - 55
KSGC023 53 259015 6784027 440 275 - 50
KSGC024 77 259026 6784021 440 273 - 54
20
ASX: BM1
ballardmining.com.au
Appendix C: JORC Code, 2012 Edition
The following table provides a summary of important assessment and reporting criteria used for the reporting of the
Mt Ida Gold Project Mineral Resource in accordance with the Table 1 checklist in The Australasian Code for the
Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC Code, 2012 Edition) on an ‘if not, why
not’ basis.
JORC Table 1: Section 1: Sampling Techniques and Data
Criteria Explanation Commentary
Sampling
techniques
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling. Include reference
to measures taken to ensure sample
representivity and the appropriate
calibration of any measurement tools or
systems used. Aspects of the
determination of mineralisation that are
Material to the Public Report. In cases
where ‘industry standard’ work has been
done this would be relatively simple (eg
‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for
fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information
The results reported in this announcement comprise of 6876
metres of RC and DD drilling completed by Ballard Mining at
Kestrel and Baldock during September-October 2026.
• RC samples were collected from a static cone
splitter mounted directly below the cyclone on the
rig;
• DD sampling was carried out on HQ and NQ half
core to lithological/alteration domain with lengths
between 0.3-1.1m
• Limited historical data has been supplied, historic
sampling has been carried out by Delta Lithium,
Hammill Resources, International Goldfields, La
Mancha Resources, Eastern Goldfields and Ora
Banda Mining, Hawk Resources and has included
RC, DD, rotary air blast (RAB) drilling, rock chip
and soil sampling.
• Sampling of historic RC has been carried out via
riffle split for 1m sampling, and scoop or spear
sampling for 4m composites, historic RAB drilling
was sampled via spear into 4m composites
• Historic core has been cut and sampled to
geological intervals
• These methods of sampling are considered
appropriate for this style of exploration
• No records are available on the exact
methodology of historic rock chip / grab /soil
sampling
• It is assumed that these were collected and
assayed using industry standard practices
21
ASX: BM1
ballardmining.com.au
Criteria Explanation Commentary
Drilling
techniques
Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg
core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit
or other type, whether core is oriented
and if so, by what method, etc).
• Current RC Drilling has been carried out by
Frontline Drilling and Top Drill. Diamond drilling
has been carried out by Frontline drilling and Terra
Drilling using a T66 Schramm RC Rig with a 143
mm face sampling hammer bit, DD drilling was
completed by a truck mounted Sandvik DE820
and a KWL 1500 and has been a combination of
PQ2, HQ2 and NQ2 diameter.
• Historical drilling has been carried out by Orlando
Drilling & PXD, RC drilling utilised an Explorac
220RC rig, T66 Schramm RC Rig with a 143 mm
face sampling hammer bit, DD drilling was
completed by a truck mounted Sandvik DE820
and a KWL 1500 and has been a combination of
PQ2, HQ2 and NQ2 diameter
• Diamond tails average 200-300m depth
• Historic drilling has been completed by various
companies including Kennedy Drilling, Wallis
Drilling, Ausdrill and unnamed contractors
• Historic DD drilling was NQ sized core
• It is assumed industry standard drilling methods
and equipment were utilised for all historic drilling
Drill sample
recovery
Method of recording and assessing core
and chip sample recoveries and results
assessed. Measures taken to maximise
sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• Sample condition is recorded for every RC drill
metre including noting the presence of water or
minimal sample return, inspections of rigs were
carried out daily
• Recovery on diamond core is recorded by
measuring the core metre by metre
• Limited sample recovery and condition
information has been supplied or found for
historic drilling
Logging Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies. Whether logging is
qualitative or quantitative in nature. Core
(or costean, channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
• Quantitative and qualitative geological logging of
drillholes adheres to company policy and includes
lithology, mineralogy, alteration, veining and
weathering
• Diamond core logging records lithology,
mineralogy, alteration, weathering, veining, RQD,
SG and structural data
• All RC chip trays, and drill core are photographed
• A complete quantitative and qualitative logging
suite was supplied for historic drilling including
lithology, alteration, mineralogy, veining and
weathering
• It is unknown if all historic core was oriented,
limited geotechnical logging has been supplied
• No historic core or chip photography has been
supplied
• Historic comments on logging are very useful in to
verify geological details between lithologies.
• Logging is of a level suitable to support Mineral
resource estimates and subsequent mining
studies
22
ASX: BM1
ballardmining.com.au
Criteria Explanation Commentary
Sub-sampling
techniques and
sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled
Share your feedback
Discover