Ballards best ever drill intercept - 9m @ 27g/t
Released
Released
Announcement PDF
P: +61 8 6466 7500
E: info@ballardmining.com.au
A: Level 2, 18 Richardson Street,
West Perth WA 6005
ASX: BM1
ballardmining.com.au
ASX Announcement – 27 July 2026
West Knell returns 9m at 27.1 g/t Gold
Highest intercept reported by Ballard at Mt Ida
• Ongoing drilling at the West Knell Prospect on the Ballard Fault
Zone has returned the following results:
o 9m at 27.1 g/t Au from 191m in WKEX101
▪ 244 gram-metre intercept
o 2m at 5.6 g/t Au from 69m in WKEX102A
o 4m at 7.2 g/t Au from 192m in WKEX102A
o 2m at 4.4 g/t Au from 35m in WKEX103
• Drilling extends mineralisation further north and at depth below
previous drilling completed at the northern end of West Knell
• West Knell to Neptune mineralised trend is approximately 3.7km
long
• Drill results will inform an updated Mineral Resource Estimate for
Mt Ida expected late in the current Quarter
• Grant of West Knell Mining Lease expected in the current Quarter
• All regional deposits remain open and drilling ongoing
Commenting on Mt Ida’s Resource Growth drilling, Managing Director Paul Brennan said:
“Thisresultstrengthens confidence that theunderexplored 13km Ballard Fault Zone is emerging
as a potential camp-scale opportunity.
The Baldock Thrust, which hosts 1.1 Moz, or 90%, of Mt Ida’s current 1.2 Moz MRE1
, has
historically received greater exploration focus since the Baldock discovery hole. The Ballard
Fault hosts the same rocks as Baldock and lies on the eastern side of the Copperfield Granite
intrusion. We are confident the Ballard Fault Zone is expected to make a significant contribution
to the scale of Mt Ida which demonstrates the potential to evolve into a multi-million-ounce gold
district.”
1
Refer to the ASX Announcement released by Ballard on the 26 February 2026 for further information
2
ASX: BM1M1
ballardmining.com.au
Ballard Mining (ASX:BM1) (“Ballard” or “the Company”) is pleased to provide an update on
recent drilling at its regional West Knell prospect at the Mt Ida Gold Project (“Mt Ida” or “the
Project”).
The Mt Ida Gold Project is located 540km northeast of Perth in the Goldfields Region of Western
Australia (Figure 1). The Mt Ida Gold Project covers 26km of prospective Greenstone belt, folded
around the Copperfield Granite (Figure 2).
Ballard is pursuing a dual stream Resource Growth and Project Development strategy. The
Company’s focus for CY2026 is Resource Growth at the cornerstone +1 Moz at 3.5 g/t gold
Baldock Mineral Resource Estimate (MRE)2
and from satellite feed sources to support a
standalone operation at Mt Ida.
Figure 1 - Ballard’s Mt Ida Gold Project, located in Western Australia’s Goldfield Region.
During May and June 2026, regional resource growth drilling has been carried out along the
Ballard Fault Zone at West Knell (includes Ayla and Europa prospects), Neptune, and Golden
Vale. Drilling along the Baldock Thrust was also carried out at Pluto, Constellation, Jupiter,
Lunar and Astro-Quasar (Figure 2). Assay results are pending. West Knell results are discussed
in this release.
Drilling consisted of 45 drill holes for 5,528 metres. Drill results are discussed below. MRE
updates for several regional deposits are anticipated in the September Quarter 2026.
2
Refer to the ASX Announcement released by Ballard on the 26 February 2026 for further information
3
ASX: BM1M1
ballardmining.com.au
Figure 2 – Mt Ida Project showing Baldock and existing gold resources at satellite prospects proximal to the
regionally significant Copperfield Granite.
4
ASX: BM1M1
ballardmining.com.au
West Knell returns Mt Ida’s best gold intersection to date
The West Knell prospect has continued to deliver substantial assay results, with the latest
drilling identifying the highest gold values ever encountered at Mt Ida by Ballard.
Drilling at the north end of the West Knell deposit has intersected 9 metres at 27.1 g/t gold from
191 metres. Grams per tonne multiplied by the length of the interval in metres (gram-metres)
are typically used to rank drilling results to reflect gold value, with this result being 244 gram-
metres.
The intercept occurs outside the current mineral resource envelope.
New drill intersections in other West Knell holes include (listed in order of descending gram-
metres):
• 4m at 7.2 g/t Au from 192m in WKEX102A
• 2m at 5.6 g/t Au from 69m in WKEX102A
• 2m at 4.4 g/t Au from 35m in WKEX103
• 6m at 1.3 g/t Au from 80m in WKEX102A
• 1m at 4.2 g/t Au from 109m in WKEX107
• 2m at 2.1 g/t Au from 46m in WKEX104
Mineralisation occurs as a series of north-south moderately east dipping shear zones
comprised of quartz and sulphides within an alteration zone of silica, biotite and chlorite. The
host rock is anorthosite, a plagioclase rich differentiated gabbro sill. The full assay results table
is set out in Appendix B. The Company is currently undertaking further drilling, and an updated
Mineral Resource Estimate is expected to be released later in the September Quarter.
West Knell is emerging as a significant shallow gold deposit within the Ballard Fault corridor at
the Mt Ida Gold Project. Ongoing exploration success has demonstrated considerable strike
continuity, with drilling extending mineralisation to approximately 1.4km in length.
West Knell forms part of the highly prospective Ballard Fault Zone, a 13km-long mineralised
corridor that hosts multiple gold discoveries and remains largely underexplored. Exploration
results continue to demonstrate that gold mineralisation is not restricted to isolated deposits,
supporting the Company's view that the Ballard Fault has the potential to develop into a camp-
scale gold system containing multiple economic deposits.
West Knell is being evaluated as a potential satellite ore source to support Ballard Mining’s
proposed standalone gold operation at Mt Ida. Its shallow depth, favourable geometry and
proximity to planned infrastructure position it as a potential contributor to future mine
schedules and production growth. The company is awaiting the grant of a mining lease over the
West Knell deposit which is anticipated within the September Quarter.
5
ASX: BM1M1
ballardmining.com.au
Figure 3 - Regional map of the Ballard Fault Zones showing geology, existing deposits and the structural corridors that
link them.
6
ASX: BM1M1
ballardmining.com.au
Figure 4 - Plan view of drilling showing mineralised intervals outside resource wireframes at West Knell.
Figure 5 - Cross section of drill hole WKEX101 showing mineralised intervals.
7
ASX: BM1M1
ballardmining.com.au
Figure 6 - Cross section of drill hole WKEX102A showing mineralised intervals.
Ballard Fault – Exploration Demonstrating Scale Potential
The extensive mineralisation identified at the regional prospects along the 13-kilometre Ballard
Fault Zone has the potential to grow substantially. The Ballard Fault is on the eastern side of the
Copperfield Granite, with the Baldock Thrust on the western side.
Drilling has identified significant mineralisation at Kestrel (53koz3
MRE), West Knell (40koz3
MRE) and Golden Vale (27koz3
MRE). Drilling has also identified mineralisation at the Ayla,
Europa, Pulsar and Neptune prospects. This highlights the potential linkage from West Knell
south to Neptune (including Europa, Ayla and Pulsar) and suggests that the entire length of the
Ballard Fault Zone may be mineralised (Figure 2 and Figure 3).
3
Refer to the ASX Announcement released by Ballard on the 26 February 2026 for further information
8
ASX: BM1M1
ballardmining.com.au
Project Background
The Mt Ida Gold Project hosts a JORC 2012-compliant Mineral Resource Estimate totalling 12.2
million tonnes at 3.0 g/t Au for 1.2 Moz4
of contained gold (Indicated and Inferred). The
cornerstone Baldock deposit, which hosts +1.0Moz at 3.5 g/t4
, forms the basis for initial
development opportunities at Mt Ida.
The Project includes six granted Mining Leases and is fully permitted for mining, including an
approved Mining Proposal, Mine Closure Plan and Native Vegetation Clearing Permit in place.
Mining approvals are in place for both open pit and underground mining at the Baldock deposit.
A Works Approval for processing of up to 2.0 Mtpa and a Tailings Storage Facility has been
received, along with granted water abstraction licences for 3.7 GL/yr.
-END-
This release is authorised by the Board of Directors of Ballard Mining Limited.
To watch a short video of Ballard management discussing West Knell and the Ballard Fault, or
to ask questions about this announcement, please visit:
https://ballardmining.com.au/link/eY0E6y
Company contacts:
PAUL BRENNAN TIM MANNERS
Managing Director Executive Director
info@ballardmining.com.au
MICHAEL VAUGHAN
Fivemark Partners
michael.vaughan@fivemark.com.au
4
Refer to the ASX Announcement released by Ballard on the 26 February 2026 for further information
9
ASX: BM1M1
ballardmining.com.au
About Ballard Mining
Ballard Mining Limited (ASX: BM1) is an exploration and development company focused on advancing its Mt Ida asset
towards production. With current JORC compliant resources of 12.2Mt @ 3.0 g/t Au, a strong balance sheet and an
experienced team driving the project development, Ballard is pursuing a growth and development strategy.
The Mt Ida Project has high grade gold resources with 93% located on granted mining leases. The main Baldock area
has received full open cut and underground mining approvals with a Works Approval for up to 2.0 Mtpa Processing
Plant and Tailings Storage Facility. Ballard is rapidly advancing the Mt Ida Project through a dual stream plan to
increase confidence in the current MRE and increase the global resource inventory via an aggressive exploration
program. All modifying factors will be advanced simultaneously.
Competent Person's Statement
Information in this announcement that relates to exploration results is based upon work undertaken by Mr Todd
Hibberd, a Competent Person who is a Member of the Australasian Institute of mining and Metallurgy (AusIMM). Mr.
Hibberd has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity which he is undertaking to qualify as a ‘Competent Person’ as defined in the 2012
Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’ (“JORC
Code”). Mr. Hibberd consents to the inclusion in this announcement of the matters based on his information in the
form and context in which it appears.
The information in this report which relates to Mineral Resources for the Baldock gold deposit at the Mt Ida Gold
Project have been previously prepared and disclosed by Ballard in accordance with the JORC Code. Refer ASX
Announcement released by Ballard on the 26 February 2026 for further information.
Past Exploration results and Mineral Resource Estimates reported in this announcement have been previously
prepared and disclosed by Ballard in accordance with the JORC Code in its Prospectus lodged with ASIC and dated
30 May 2025 (as amended by the Supplementary Prospectus lodged with ASIC and dated 17 June 2025) (the
Prospectus).
Disclaimer
This release may include forward-looking and aspirational statements. These statements are based on Ballard
management’s expectations and beliefs concerning future events as of the time of the release of this announcement.
Forward-looking and aspirational statements are necessarily subject to risks, uncertainties and other factors, some
of which are outside the control of Ballard, which could cause actual results to differ materially from such
statements. Ballard makes no undertaking to subsequently update or revise the forward looking or aspirational
statements made in this release to reflect events or circumstances after the date of this release, except as required
by applicable laws and the ASX Listing Rules.
10
ASX: BM1M1
ballardmining.com.au
Appendix A: Ballard Global Mineral Resource Estimate (February 2026)
Cutoff Deposit
Indicated Inferred Total
Tonnes Grade Ounces Tonnes Grade Ounces Tonnes Grade Ounces
(000s) g/t Au (000s) (000s) g/t Au (000s) (000s) g/t Au (000s)
Open cut
0.5g/t Au
Baldock 2,916 3.9 362 395 2.6 33 3,311 3.7 395
Kestrel - - - 940 1.6 48 940 1.6 48
Golden Vale - - - 496 1.7 27 496 1.7 27
Bombay 711 1.3 30 711 1.3 30
West Knell 238 3.3 25 238 3.3 25
Jupiter 50 1.7 3 50 1.7 3
Tailings - - - 500 0.5 8 500 0.5 8
Underground
1.5g/t Au
Baldock 2,658 3.6 307 2,992 3.2 304 5,651 3.4 610
Kestrel - - - 80 1.8 5 80 1.8 5
Bombay 30 3 3 30 3 3
West Knell 192 2.4 15 192 2.4 15
Jupiter 90 2.7 8 90 2.7 8
All
Baldock 5,574 3.7 669 3,388 3.1 337 8,962 3.5 1,006
Kestrel - - 1,000 1.7 53 1,000 1.7 53
Golden Vale - - - 496 1.7 27 496 1.7 27
Bombay 740 1.4 33 740 1.4 33
West Knell 420 2.9 40 420 2.9 40
Jupiter 140 2.3 11 140 2.3 11
Tailings 500 0.5 8 500 0.5 8
Total 5,574 3.7 669 6,684 2.4 509 12,258 3.0 1,178
Notes:
• Open pit resources are reported within optimised pit shells based on A$4,500 per ounce gold price and
reported at 0.5 g/t Au cut-off grade.
• Underground resources are reported below optimised pits and constrained within mineralised domains in
optimised mineable shapes at 1.5g/t gold cut-off grade.
• All figures are rounded to reflect appropriate levels of confidence.
• Apparent differences may occur due to rounding.
11
ASX: BM1M1
ballardmining.com.au
Appendix B: Recent Project Data
Appendix B1: Recent Exploration Significant Intercepts reported in this announcement
* Reported intercepts are downhole lengths. True widths are not currently known
* Intersections reported about 0.5 g/t with a maximum of 2 metres of internal dilution
* NSI values indicate that No Significant Intersection was identified
Hole ID From To Length Gold g/t Lode
WKEX081 80 81 1 1.23 West Knell
WKEX088 34 35 1 0.53 West Knell
WKEX088 41 44 3 1.06 West Knell
WKEX094 19 21 2 0.79 West Knell
WKEX098 98 100 2 1.18 West Knell
WKEX101 191 200 9 27.1 West Knell
WKEX102A 48 49 1 0.77 West Knell
WKEX102A 69 71 2 5.63 West Knell
WKEX102A 80 86 6 1.3 West Knell
WKEX102A 192 196 4 7.19 West Knell
WKEX103 35 37 2 4.44 West Knell
WKEX104 46 48 2 2.06 West Knell
WKEX105 71 73 2 0.84 West Knell
WKEX105 121 122 1 0.63 West Knell
WKEX107 51 52 1 0.69 West Knell
WKEX107 109 110 1 4.37 West Knell
WKEX111 0 1 1 0.65 West Knell
WKEX112 34 35 1 1.34 West Knell
WKEX112 127 128 1 1.15 West Knell
WKEX112 154 155 1 0.5 West Knell
WKEX115 78 79 1 0.54 West Knell
WKEX116 28 31 3 0.84 West Knell
WKEX117 106 107 1 1.06 West Knell
WKEX118 38 39 1 0.6 West Knell
WKEX119 24 28 4 1.07 West Knell
WKEX119 64 65 1 0.5 West Knell
WKEX120 64 65 1 0.52 West Knell
WKEX123 73 74 1 0.62 West Knell
WKEX123 98 99 1 0.6 West Knell
WKEX123 131 132 1 1.06 West Knell
WKEX123 134 135 1 0.51 West Knell
WKEX082 NSI West Knell
WKEX083 NSI West Knell
WKEX084 NSI West Knell
WKEX085 NSI West Knell
12
ASX: BM1M1
ballardmining.com.au
Hole ID From To Length Gold g/t Lode
WKEX086 NSI West Knell
WKEX087 NSI West Knell
WKEX089 NSI West Knell
WKEX090 NSI West Knell
WKEX091 NSI West Knell
WKEX092 NSI West Knell
WKEX093 NSI West Knell
WKEX095 NSI West Knell
WKEX096 NSI West Knell
WKEX097 NSI West Knell
WKEX099 NSI West Knell
WKEX100 NSI West Knell
WKEX102 NSI West Knell
WKEX106 NSI West Knell
WKEX108 NSI West Knell
WKEX109 NSI West Knell
WKEX110 NSI West Knell
WKEX110A NSI West Knell
WKEX113 NSI West Knell
WKEX114 NSI West Knell
WKEX121 NSI West Knell
WKEX122 NSI West Knell
13
ASX: BM1M1
ballardmining.com.au
Appendix B2: Collar Information for holes reported in this announcement
Hole ID Depth East North RL Azi Dip
WKEX081 89 256,845 6,783,205 445 276 - 60
WKEX082 131 256,894 6,783,205 445 275 - 60
WKEX083 83 256,825 6,783,156 445 274 - 60
WKEX084 131 256,874 6,783,154 445 274 - 60
WKEX085 77 256,811 6,783,101 446 273 - 60
WKEX086 137 256,862 6,783,103 446 273 - 60
WKEX087 47 256,805 6,783,050 446 273 - 61
WKEX088 131 256,857 6,783,051 446 273 - 60
WKEX089 53 256,795 6,783,001 446 274 - 60
WKEX090 89 256,847 6,783,000 446 272 - 60
WKEX091 83 256,777 6,782,946 446 271 - 60
WKEX092 89 256,829 6,782,954 446 267 - 60
WKEX093 47 256,748 6,782,901 447 273 - 60
WKEX094 77 256,786 6,782,910 446 273 - 60
WKEX095 47 256,695 6,782,861 447 271 - 60
WKEX096 47 256,743 6,782,860 447 273 - 60
WKEX097 83 256,792 6,782,860 447 273 - 60
WKEX098 185 257,085 6,783,548 443 271 - 60
WKEX099 191 257,098 6,783,502 443 270 - 60
WKEX100 215 257,355 6,783,799 447 271 - 60
WKEX101 221 257,353 6,783,853 447 270 - 60
WKEX102 6 257,356 6,783,911 447 270 - 60
WKEX102A 226 257,356 6,783,911 447 271 - 60
WKEX103 156 257,150 6,783,508 443 272 - 60
WKEX104 108 257,151 6,783,549 443 270 - 60
WKEX105 198 257,101 6,783,607 443 271 - 61
WKEX106 120 257,153 6,783,597 443 269 - 60
WKEX107 157 257,102 6,783,648 443 269 - 60
WKEX108 126 257,151 6,783,647 443 269 - 60
WKEX109 186 257,103 6,783,695 443 272 - 61
WKEX110 24 257,103 6,783,748 443 270 - 60
WKEX110A 186 257,105 6,783,752 443 272 - 60
WKEX111 186 257,102 6,783,798 443 268 - 60
WKEX112 180 257,102 6,783,846 443 271 - 61
WKEX113 108 257,151 6,783,835 444 263 - 60
WKEX114 120 257,154 6,783,881 444 271 - 60
WKEX115 90 257,103 6,783,897 444 271 - 60
WKEX116 138 257,215 6,783,942 445 273 - 60
WKEX117 174 257,155 6,783,934 444 268 - 60
WKEX118 144 256,900 6,783,844 442 270 - 60
WKEX119 168 256,956 6,783,845 442 271 - 60
14
ASX: BM1M1
ballardmining.com.au
Hole ID Depth East North RL Azi Dip
WKEX120 138 257,006 6,783,845 443 275 - 60
WKEX121 96 256,909 6,783,895 442 278 - 60
WKEX122 102 256,958 6,783,896 443 271 - 60
WKEX123 138 257,006 6,783,897 443 272 - 60
15
ASX: BM1M1
ballardmining.com.au
Appendix C: JORC Code, 2012 Edition
The following table provides a summary of important assessment and reporting criteria used for the reporting of the
Mt Ida Gold Project Mineral Resource in accordance with the Table 1 checklist in The Australasian Code for the
Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC Code, 2012 Edition) on an ‘if not,
why not’ basis.
JORC Table 1: Section 1: Sampling Techniques and Data
Criteria Explanation Commentary
Sampling
techniques
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling. Include reference
to measures taken to ensure sample
representivity and the appropriate
calibration of any measurement tools or
systems used. Aspects of the
determination of mineralisation that are
Material to the Public Report. In cases
where ‘industry standard’ work has been
done this would be relatively simple (eg
‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for
fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information
• Gold sampling activities carried out by Ballard
Mining at the Mt Ida Project include reverse
circulation (RC)and diamond (DD) drilling.
• RC samples were collected from a static cone
splitter mounted directly below the cyclone on
the rig; DD sampling was carried out to
lithological/alteration domain with lengths
between 0.3-1.1m
• Limited historical data has been supplied,
historic sampling has been carried out by Delta
Lithium, Hammill Resources, International
Goldfields, La Mancha Resources, Eastern
Goldfields and Ora Banda Mining, Hawk
Resources and has included RC, DD, rotary air
blast (RAB) drilling, rock chip and soil sampling.
• Sampling of historic RC has been carried out via
riffle split for 1m sampling, and scoop or spear
sampling for 4m composites, historic RAB drilling
was sampled via spear into 4m composites
• Historic core has been cut and sampled to
geological intervals
• These methods of sampling are considered
appropriate for this style of exploration
• No records are available on the exact
methodology of historic rock chip / grab /soil
sampling
• It is assumed that these were collected and
assayed using industry standard practices
16
ASX: BM1M1
ballardmining.com.au
Criteria Explanation Commentary
Drilling
techniques
Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details
(eg core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
etc).
• RC Drilling has been carried out by Orlando
Drilling, Frontline Drilling, TopDrill & PXD, RC
drilling utilised an Explorac 220RC rig, T66
Schramm RC Rig with a 143 mm face sampling
hammer bit, DD drilling was completed by a truck
mounted Sandvik DE820 and a KWL 1500 and has
been a combination of PQ2, HQ2 and NQ2
diameter.
• Diamond tails average 200-300m depth
• Historic drilling has been completed by various
companies including Kennedy Drilling, Wallis
Drilling, Ausdrill and unnamed contractors
• Historic DD drilling was NQ sized core
• It is assumed industry standard drilling methods
and equipment were utilised for all historic
drilling
Drill sample
recovery
Method of recording and assessing core
and chip sample recoveries and results
assessed. Measures taken to maximise
sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• Sample condition is recorded for every RC drill
metre including noting the presence of water or
minimal sample return, inspections of rigs were
carried out daily
• Recovery on diamond core is recorded by
measuring the core metre by metre
• Limited sample recovery and condition
information has been supplied or found for
historic drilling
Logging Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies. Whether logging is
qualitative or quantitative in nature.
Core (or costean, channel, etc)
photography. The total length and
percentage of the relevant intersections
logged.
• Quantitative and qualitative geological logging of
drillholes adheres to company policy and
includes lithology, mineralogy, alteration, veining
and weathering
• Diamond core logging records lithology,
mineralogy, alteration, weathering, veining, RQD,
SG and structural data
• All RC chip trays, and drill core are photographed
• A complete quantitative and qualitative logging
suite was supplied for historic drilling including
lithology, alteration, mineralogy, veining and
weathering
• It is unknown if all historic core was oriented,
limited geotechnical logging has been supplied
• No historic core or chip photography has been
supplied
• Historic comments on logging are very useful in
to verify geological details between lithologies.
• Logging is of a level suitable to support Mineral
resource estimates and subsequent mining
studies
17
ASX: BM1M1
ballardmining.com.au
Criteria Explanation Commentary
Sub-sampling
techniques and
sample
preparation
If core, whether cut or sawn and
whether quarter, half or all core taken.
If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry. For all sample
types, the nature, quality and
appropriateness of the sample
preparation technique.
Quality control procedures adopted for
all sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for
instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to
the grain size of the material being
sampled.
• DD sampling is undertaken by
lithological/alteration domain to a maximum of
1.1m and a minimum of 0.3m. Core is cut in half
with one half sent to the lab and one half retained
in the core tray
• Occasional wet RC samples are encountered;
extra cleaning of the splitter was carried out
afterward
• Should over 6 samples in a row be wet, the hole
will be abandoned if it is aimed to be used in an
MRE, with the intention of Diamond tailing it to
retain sample quality.
• RC and DD samples have been analysed for Au
by 50g fire assay in the past by ALS, Nagrom, NAL
and SGS, and via photon assay by ALS
• Samples analysed by via fire assay at ALS,
Nagrom, NAL and SGS were dried, crushed and
pulverised to 80% passing 75 microns before
undergoing a selected peroxide fusion digest or 4
acid digest with ICPMS finish or fire assay with
ICPMS finish
• Samples are now analysed via photon assay at
ALS dried, crushed and pulverised to 80%
passing 75 microns with 500g of material utilised
for the analysis
• An ICP finish is completed post-Photon to
determine values of other analytes ie Cu, As, S
etc)
• RC duplicate field samples were carried out at a
rate of 1:20 and were sampled directly from the
splitter on the rig. These were submitted for the
same assay process as the primary samples and
the laboratory are unaware of such submissions
• The sampling methodology allows for select
manual duplicates of known graded zones to
improve QAQC
• Historic chip sampling methods include single
metre riffle split and 4m composites that were
either scoop or spear sampled, while historic
core was cut onsite and half core sampled
• Historic samples were analysed at LLAS,
Genalysis and unspecified laboratories
• Historic Au analysis techniques generally
included crushing, splitting if required, and
pulverisation, with aqua regia or fire assay with
AAS finish used to determine concentration
18
ASX: BM1M1
ballardmining.com.au
Criteria Explanation Commentary
Quality of assay
data and
laboratory tests
The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (ie lack of bias) and precision
have been established.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
• Samples have been analysed by external
laboratories utilising industry standard methods
• The assay methods utilised by ALS, Nagrom, NAL
and SGS for RC chip and core sampling allow for
total dissolution of the sample where required
• Photon assay is a non-destructive total analysis
technique
• Standards and blanks are inserted at a rate of 1 in
20 in RC and DD sampling, All QAQC analyses
were within tolerance
• QAQC reviews are completed on a monthly basis
with any fails being investigated thoroughly in
conjunction with the lab.
• All historic samples are assumed to have been
prepared and assayed by industry standard
techniques and methods
• Limited historic QAQC data has been supplied,
industry standard best practice is assumed
Verification of
sampling and
assaying
The verification of significant
intersections by either independent or
alternative company personnel. The use
of twinned holes. Documentation of
primary data, data entry procedures,
data verification, data storage (physical
and electronic) protocols. Discuss any
adjustment to assay data
• Significant intercepts have been reviewed by
senior personnel
• No specific twinned holes have been completed,
but drilling has verified historic drilling intervals
• Primary data is collected via excel templates and
third-party logging software with inbuilt validation
functions, the data is forwarded to the Database
administrator for entry into a secure SQL
database. Historic data was supplied in various
formats and has been validated as much as
practicable
• No adjustments to assay data have been made
• Data entry, verification and storage protocols
remain unknown for historic operators
Location of data
points
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral
Resource estimation. Specification of
the grid system used. Quality and
adequacy of topographic control
• MGA94 zone 51 grid coordinate system is used
• Current drilling collars have been pegged using a
DGPS unit, all collars will be surveyed upon
program completion by an independent third
party
• All infill drill holes are pegged using a DGPS for
maximum accuracy
• Downhole surveys are completed by the drilling
contractors using a true north seeking gyro
instrument, AC drillholes did not have downhole
surveys carried out
• Topography has been surveyed by recent
operators. Collar elevations are consistent with
surrounding holes and the natural surface
elevation
• Historic collars are recorded as being picked up
by DGPS, GPS or unknown methods and utilised
the MGA94 zone 51 coordinate system
• Historic downhole surveys were completed by
north seeking gyro, Eastman single shot and multi
shot downhole camera
19
ASX: BM1M1
ballardmining.com.au
Criteria Explanation Commentary
Data spacing and
distribution
Data spacing for reporting of Exploration
Results. Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications
applied. Whether sample compositing
has been applied.
• Drill hole spacing is variable throughout the
program area
• Spacing is considered appropriate for this style of
exploration
• Sample compositing has not been applied
Orientation of
data in relation to
geological
structure
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, conside
Share your feedback
Discover