Outstanding Infill Results at Baldock
Released
Released
Announcement PDF
ASX Announcement – 22nd September 2025
OUTSTANDING INFILL RESULTS
ADVANCE BALDOCK RESOURCE
HIGHLIGHTS
•
Further Infill results continue to confirm and refine the existing high-grade
Baldock gold Mineral Resource Estimate (930koz @ 4.1 g/t1 Indicated &
Inferred).
•
Infill drilling highlights include:
o 5m at 18.94 g/t gold from 205 metres in DFS299
o 12m at 7.47 g/t gold from 98 metres in DFS280
o 11m at 4.8 g/t gold from 198 metres in DFS327
o 5m at 8.76 g/t gold from 67 metres in DFS325
o 5m at 7.49 g/t gold from 84 metres in DFS279
o 5m at 6.76 g/t gold from 170 metres in DFS322
o 4m at 7.12 g/t gold from 85 metres in DFS287
o 6m at 3.36 g/t gold from 71 metres in DFS325A
•
Extensional result of 3m at 29.19 g/t gold from 42 metres in DFS285
•
Infill program 60% complete with 259 holes and 43,517 metres drilled
•
Key Modifying Factor work streams including Feasibility Level Metallurgy and
Geotechnical Studies are continuing
Managing Director, Paul Brennan commenting on the new results noted that:
“The latest batch of infill results continue to confirm and refine the quality of the current Mineral
Resource Estimate at Baldock. Together with the metallurgical and geotechnical studies the
infill drilling will allow us to convert a substantial portion of the inferred resource to indicated
resource and thence to Probable Reserves. We are targeting a Maiden Reserve for Baldock by
the middle of next year which we expect to support an initial 5 – 6 Year Mine Life at Baldock.
Several higher grade results in this announcement are outside the existing Mineral Resource
Estimate such as 3 metres at 29.2 g/t gold which highlights the potential of the Mineral
Resource to increase in size. We are progressing through the infill program as planned which is
now approximately 60% complete and then will focus on extensional drilling at Baldock.”
1 Refer to the Ballard IPO Prospectus lodged with ASIC and dated 30 May 2025 (as amended by the Supplementary
Prospectus lodged with ASIC and dated 17 June 2025) for further information on the MRE
P: +61 8 6466 7500
E: info@ballardmining.com.au
A: Level 2, 18 Richardson Street,
West Perth WA 6005
ASX: BM1
ballardmining.com.au
Ballard Mining (ASX:BM1) (“Ballard” or “the Company”) is pleased to provide an update on
the infill drilling program at its Mt Ida Gold Project located 540km northeast of Perth in the
Goldfields region of Western Australia (Figure 10). The Mt Ida Gold Project covers 26km of
prospective greenstone belt, folded around the Copperfield Granite (Figure 11).
Three drill rigs, comprising two Reverse Circulation and one Diamond, are currently undertaking
the infill drilling program (Figure 1).
Figure 1 - Three Rigs undertaking Infill Drilling at Mt Ida (view to south)
Compelling Infill drilling results to drive resource conversion
The current release of infill assay results from the Baldock gold deposit comprise 52 drill holes
for 10,041 metres that have been mainly drilled at the northern and central parts of the Baldock
zone to convert inferred resources to indicated resources (Figure 3 and Figure 4).
The current infill drilling program is designed to increase the confidence of the existing Mineral
Resource Estimate at Baldock and aims to upgrade the resource classification from inferred to
indicated categories and to increase the overall size of the mineral resource.
The infill drilling program is approximately 60% complete. As noted on page 1, the drilling
intersected multiple holes with higher grade intersections.
ASX: BM1
ballardmining.com.au
2
Resource Development Strategy
The strategy for the Phase One infill drilling is to convert an initial 400,000-500,000 ounces of
the current 930koz at 4.1 g/t2 Baldock deposit from inferred to indicated resources such that
Probable Reserves can then be established. This will provide the basis for an initial 5 – 6 Year
mine life at Baldock.
The Company is currently focussed on just five major lodes (1090, 1100, 2140, 2120, and 2160)
out of a total of 47 lodes. Many of the results in this announcement are from outside these five
lodes and fall into open pit resource optimisations. Further drilling is expected to increase
mineral resources accessible via open pit.
The full assay results table is set out in Appendix B, and outlines which results are included
within the current Mineral Resource Estimate, and those which fall outside.
Infill and Extensional Drilling Schedule
Phase one infill drilling (20m by 20m) is 60% complete with 36,104 metres remaining to drill.
This program should be completed in December. Extensional drilling will then commence at
Baldock which is designed to add additional inferred resources. Based on the results of the
extensional drilling a follow up Phase 2 infill drilling program is then planned to convert
additional inferred to indicated resources (Figure 2).
Figure 2 – FY2026 Baldock Drilling Schedule
Refer to the Ballard IPO Prospectus lodged with ASIC and dated 30 May 2025 (as amended by the
Supplementary Prospectus lodged with ASIC and dated 17 June 2025) for further information on the
MRE
2
ASX: BM1
ballardmining.com.au
3
Figure 3 - Baldock infill drilling covered in this ASX release over gold resource area showing holes reported in
this announcement.
ASX: BM1
ballardmining.com.au
4
Figure 4 - Detailed drilling location plan showing significant gold intersections reported in this announcement
ASX: BM1
ballardmining.com.au
5
Figure 5 - Cross section A-A’ showing multiple new assay intersections including 5 metres at 18.94 g/t gold in the
2140 lode and 4 metres at 3.5 g/t in an extensional position to the 2120 lode
ASX: BM1
ballardmining.com.au
6
Figure 6 - Cross section B-B’ of new assay intersection of 3 metres at 29.2 g/t gold in the 2160 lode but outside
the Mineral resource estimate, 5 metres at 7.5 g/t gold and 12 metres at 7.5 g/t gold in the 2140 lode
ASX: BM1
ballardmining.com.au
7
Figure 7 - Cross section C-C’ of new assay intersection of 4 metres at 7.1 g/t gold, within the 2140 lode
ASX: BM1
ballardmining.com.au
8
Figure 8 - Cross section D-D’ of new assay intersection of 5 metres at 6.76 g/t gold in the 2140 lode and 6 metres at
3.3 g/t gold in the 2120 lode.
ASX: BM1
ballardmining.com.au
9
Figure 9 - Cross section E-E’ of new assay intersection of 11 metres at 4.8 g/t gold, in the 2140 lode, and two
intersections of 5 metres at 8.76 g/t gold and 6 metres at 3.36 g/t gold in the 2120 lode.
ASX: BM1
ballardmining.com.au
10
Project Background
The Mt Ida Gold Project hosts a JORC 2012-compliant Mineral Resource Estimate totalling 10.3
million tonnes @ 3.3g/t Au for 1.1 million ounces3 of contained gold. The Baldock deposit, which
hosts 930koz @ 4.1g/t3, forms the basis for future development opportunities at Mt Ida.
Figure 10 Ballard’s Mt Ida Gold Project, located in Western Australia’s Goldfield Region.
A 130,000m drill program is underway across the Project, targeting highly prospective and
underexplored zones along the 26km strike of both the Baldock Thrust and the Ballard Fault
(Figure 6).
The Project includes six granted mining leases and is fully permitted for mining including an
approved Mining Proposal and Mine Closure Plan.
Mining approvals are in place for both open pit and underground mining at the Baldock deposit.
A Works Approval application for up to 1.5Mtpa Processing and Tails Storage has been
submitted and is currently under assessment.
Refer to the Ballard IPO Prospectus lodged with ASIC and dated 30 May 2025 (as amended by the Supplementary
Prospectus lodged with ASIC and dated 17 June 2025) for further information on the MRE
3
ASX: BM1
ballardmining.com.au
11
Figure 11 – Mt Ida identified Au prospects with planned infill and Phase 1 exploration programs
-END-
This release is authorised by the Board of Directors of Ballard Mining Limited.
For further information visit our website at ballardmining.com.au or contact:
PAUL BRENNAN
Managing Director
info@ballardmining.com.au
ASX: BM1
ballardmining.com.au
12
About Ballard Mining
Ballard Mining Limited (ASX: BM1) is an exploration and development company focused on advancing its Mt Ida asset towards
production. With current JORC compliant resources of 10.3Mt @ 3.3 g/t Au, strong balance sheet and an experienced team driving
the project development, Ballard is pursuing a growth and development strategy.
The Mt Ida Project has high grade gold resources with 93% located on granted mining leases. The main Baldock area has received
full open cut and underground mining approvals with a Works Approval for a 1.5Mtpa processing facility submitted to DWER and
under assessment. Ballard is rapidly advancing the Mt Ida Project through a dual stream plan to increase confidence in the
current MRE and increase the global resource inventory via an aggressive exploration program. All modifying factors will be
advanced simultaneously.
Competent Person's Statement
Information in this announcement that relates to exploration results is based upon work undertaken by Mr Todd Hibberd, a
Competent Person who is a Member of the Australasian Institute of mining and Metallurgy (AusIMM). Mr. Hibberd has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is
undertaking to qualify as a ‘Competent Person’ as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves’ (“JORC Code”). Mr. Hibberd consents to the inclusion in this announcement of the
matters based on his information in the form and context in which it appears.
Past Exploration results and Mineral Resource Estimates reported in this announcement have been previously prepared and
disclosed by Ballard in accordance with the JORC Code in its Prospectus lodged with ASIC and dated 30 May 2025 (as amended by
the Supplementary Prospectus lodged with ASIC and dated 17 June 2025) (the Prospectus). The Company confirms that it is not
aware of any new information or data that materially affects the information included in the Prospectus. The Company confirms
that the form and content in which the Competent Person's findings are presented here have not been materially modified from the
Prospectus, and all material assumptions and technical parameters underpinning Mineral Resource Estimates in the Prospectus
continue to apply and have not materially changed. Refer to the Prospectus for further information.
Disclaimer
This release may include forward-looking and aspirational statements. These statements are based on Ballard management’s
expectations and beliefs concerning future events as of the time of the release of this announcement. Forward-looking and
aspirational statements are necessarily subject to risks, uncertainties and other factors, some of which are outside the control of
Ballard, which could cause actual results to differ materially from such statements. Ballard makes no undertaking to subsequently
update or revise the forward looking or aspirational statements made in this release to reflect events or circumstances after the
date of this release, except as required by applicable laws and the ASX Listing Rules.
ASX: BM1
ballardmining.com.au
13
Appendix A: April 20254 Mineral Resource Estimate
Cut off
Open cut Au
0.5 g/t
Underground Au
1.5 g/t
All
Deposit
Tonnes
(000s)
Indicated
Grade Ounces
g/t Au
(000s)
Tonnes
(000s)
Baldock
Kestrel
Golden Vale
Bombay
West Knell
Jupiter
Mt Ida Tailings
Baldock
Kestrel
Bombay
West Knell
Jupiter
Baldock
Kestrel
Golden Vale
Bombay
West Knell
Jupiter
Mt Ida Tailings
Total
2,600
4.5
365
1,570
3.6
-
-
-
940
1.6
-
-
-
496
Inferred
Grade Ounces
g/t Au
(000s)
Tonnes
(000s)
Total
Grade
g/t Au
Ounces
(000s)
200
4,120
4.2
563
48
940
1.6
48
1.7
27
496
1.7
27
711
1.3
30
711
1.3
30
238
3.3
25
238
3.3
25
50
1.7
3
50
1.7
3
-
-
-
500
0.5
8
500
0.5
8
242
4.8
37
2,610
4.0
338
2,850
4.0
368
-
-
-
80
1.8
5
80
1.8
5
30
3.0
3
30
3.0
3
192
2.4
15
192
2.4
15
2,840
4.5
-
-
-
-
2,840
4.5
402
-
402
90
2.7
8
90
2.7
8
4,220
3.9
532
7,000
4.1
930
1,000
1.7
53
1,000
1.7
53
496
1.7
27
496
1.7
27
740
1.4
33
740
1.4
33
420
2.9
40
420
2.9
40
140
2.3
11
140
2.3
11
500
0.5
8
500
0.5
7,500
3.0
699
10,310
3.3
8
1,102
Refer to the Ballard IPO Prospectus lodged with ASIC and dated 30 May 2025 (as amended by the Supplementary
Prospectus lodged with ASIC and dated 17 June 2025) for further information on the MRE
4
ASX: BM1
ballardmining.com.au
14
Appendix B: Recent Project Data
Appendix B1: Recent Significant Intercepts reported in this announcement
* Intersections reported about 0.5 g/t with a maximum of 2 metres of internal dilution
* Blank Cu values indicate that Cu assays have not yet been received
Hole ID
DFS299
DFS325
DFS369
DFS308
DFS279
DFS280
DFS287
DFS322
DFS333
DFS282
DFS327
DFS282
DFS278
DFS325A
DFS321
DFS316
DFS332
DFS328
DFS314
DFS090
DFS290
DFS229
DFS325A
DFS340
DFS281
DFS318
DFS309
DFS361
DFS298
DFS326
DFS127
DFS359
DFS274
DFS296
DFS326
DFS360
DFS291
From
205.00
67.00
196.00
291.40
84.00
98.00
85.00
170.00
232.00
151.00
198.00
156.00
209.00
71.00
61.00
170.00
108.00
120.00
142.00
98.80
190.00
177.00
160.00
144.00
112.00
205.00
147.00
185.00
192.00
172.00
296.65
138.00
117.00
139.00
83.00
170.00
199.00
To
210.00
72.00
198.00
292.70
89.00
110.00
89.00
175.00
234.00
152.00
209.00
157.00
210.00
77.00
67.00
171.00
111.00
122.00
143.00
99.13
192.00
179.05
161.00
148.00
113.00
209.00
148.00
186.00
193.00
175.00
297.00
139.00
119.00
141.00
86.00
171.00
201.00
Length
5.0
5.0
2.0
1.3
5.0
12.0
4.0
5.0
2.0
1.0
11.0
1.0
1.0
6.0
6.0
1.0
3.0
2.0
1.0
0.3
2.0
2.1
1.0
4.0
1.0
4.0
1.0
1.0
1.0
3.0
0.4
1.0
2.0
2.0
3.0
1.0
2.0
Gold g/t
18.94
8.76
8.53
7.96
7.49
7.47
7.12
6.76
6.10
6.04
4.80
3.85
3.50
3.36
3.31
3.20
3.06
3.02
2.63
2.21
2.20
2.18
2.11
2.10
2.01
1.97
1.76
1.69
1.63
1.62
1.37
1.36
1.32
1.22
1.13
1.13
1.09
ASX: BM1
ballardmining.com.au
Lode
2140
2141
2140
2140
2140
2140
2140
2140
2140
2140
2140
2140
2140
2141
2141
2140
2141
2141
2140
2112
2140
2200
2140
2141
2140
2140
2140
2140
2140
2140
2110
2142
2140
2140
2141
2140
2140
15
Hole ID
DFS321
DFS090
DFS283
DFS340
DFS314
DFS359
DFS285
DFS289
DFS090
DFS090
DFS127
DFS293
DFS288
DFS293
DFS281
DFS363
DFS090
DFS360
DFS369
DFS293
DFS279
DFS360
DFS322
DFS371
DFS274
DFS361
DFS297
DFS281
DFS363
DFS295
DFS090
DFS283
DFS285
DFS283
DFS277
DFS199
DFS283
DFS297
DFS287
DFS367
DFS192
From
157.00
133.43
164.00
237.00
48.00
156.00
212.00
142.00
186.00
157.04
244.00
74.00
108.00
95.00
69.00
12.00
86.58
124.00
53.00
82.00
55.00
30.00
39.00
68.00
99.00
35.00
4.00
118.00
118.00
64.00
110.10
92.00
42.00
95.00
115.00
143.00
114.00
88.00
104.00
173.00
187.00
To
158.00
133.96
166.00
239.00
49.00
157.00
213.00
143.00
186.75
157.96
245.43
76.00
109.00
96.00
70.00
20.00
88.25
125.00
54.00
83.00
56.00
32.00
41.00
71.00
100.00
36.00
8.00
119.00
119.00
68.00
111.00
93.00
45.00
96.00
116.00
144.00
115.00
92.00
105.00
174.00
190.00
Length
1.0
0.5
2.0
2.0
1.0
1.0
1.0
1.0
0.8
0.9
1.4
2.0
1.0
1.0
1.0
8.0
1.7
1.0
1.0
1.0
1.0
2.0
2.0
3.0
1.0
1.0
4.0
1.0
1.0
4.0
0.9
1.0
3.0
1.0
1.0
1.0
1.0
4.0
1.0
1.0
3.0
Gold g/t
1.07
1.05
0.95
0.95
0.58
0.56
0.54
0.53
0.51
5.41
3.38
3.08
2.92
2.58
2.41
1.14
1.13
1.03
1.03
0.98
0.89
0.75
0.71
0.70
0.64
0.63
0.58
0.55
0.55
0.53
0.51
0.50
29.19
27.77
12.12
8.36
5.79
3.43
3.07
2.69
2.56
Lode
2140
2110
2140
2140
2141
2140
2140
2140
2130
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Pit
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
ASX: BM1
ballardmining.com.au
16
Hole ID
DFS285
DFS340
DFS286
DFS217
DFS292
DFS308
DFS335
DFS340
DFS297
DFS299
DFS340
DFS327
DFS335
DFS328
DFS278
DFS308
DFS334
DFS279
DFS327
DFS327
DFS327
DFS190
DFS340
DFS328
DFS340
DFS334
DFS296
DFS340
DFS190
DFS381
DFS365
DFS323
DFS309
DFS301
DFS294
DFS291
DFS275
DFS276
From
230.00
208.00
223.00
137.52
206.00
251.85
226.00
246.00
179.00
128.00
56.00
103.00
239.00
193.00
215.00
244.40
148.00
98.00
190.00
219.00
107.00
120.00
175.00
202.00
251.00
70.00
158.00
234.00
107.00
To
232.00
209.00
226.00
139.76
212.00
253.20
228.00
247.00
180.00
129.00
57.00
105.00
240.00
195.00
217.00
246.00
152.00
99.00
191.00
220.00
108.00
124.00
176.00
203.00
252.00
71.00
159.00
236.00
108.00
Length
2.0
1.0
3.0
2.2
6.0
1.4
2.0
1.0
1.0
1.0
1.0
2.0
1.0
2.0
2.0
1.6
4.0
1.0
1.0
1.0
1.0
4.0
1.0
1.0
1.0
1.0
1.0
2.0
1.0
Gold g/t
2.41
2.22
1.94
1.82
1.63
1.50
1.50
1.22
1.07
1.03
0.99
0.94
0.90
0.89
0.89
0.85
0.85
0.82
0.71
0.70
0.69
0.67
0.65
0.63
0.63
0.60
0.60
0.54
0.50
Lode
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
Outside MRE
NSI
NSI
NSI
NSI
NSI
NSI
NSI
NSI
NSI
ASX: BM1
ballardmining.com.au
17
Appendix B2: Collar Information for holes reported in this announcement
Hole ID Depth
HoleID
Depth
DFS090
225.7
DFS127
348.1
DFS190
220
DFS192
210
DFS199
159
DFS217
177.7
DFS229
89
DFS274
156
DFS277
189
DFS278
240
DFS279
114
DFS280
138
DFS281
144
DFS282
186
DFS283
200
DFS285
246
DFS286
294
DFS287
120
DFS288
126
DFS289
162
DFS290
204
DFS292
234
DFS293
102
DFS295
144
DFS296
168
DFS297
180
DFS298
200
DFS299
222
DFS300
186
DFS308
101
DFS314
178
DFS316
216
DFS318
270
DFS321
202
DFS322
220
DFS325
132
DFS325A
198
DFS326
186
DFS327
234
DFS328
240
East
East
253,081
252,909
252,631
252,600
252,602
252,578
252,544
252,875
252,794
252,778
252,873
252,842
252,838
252,821
252,801
252,766
252,749
252,837
252,834
252,796
252,779
252,748
252,833
252,808
252,793
252,774
252,758
252,742
252,769
252,615
252,688
252,659
252,632
252,661
252,646
252,648
252,648
252,634
252,619
252,604
North
North
6,778,698
6,778,731
6,778,871
6,778,850
6,778,905
6,778,961
6,778,982
6,779,139
6,779,083
6,779,072
6,779,161
6,779,139
6,779,137
6,779,124
6,779,110
6,779,086
6,779,074
6,779,160
6,779,158
6,779,131
6,779,120
6,779,097
6,779,182
6,779,164
6,779,153
6,779,141
6,779,128
6,779,117
6,779,161
6,779,224
6,779,324
6,779,304
6,779,284
6,779,330
6,779,320
6,779,345
6,779,345
6,779,335
6,779,325
6,779,315
RL
Azi
RL
470.94
471.37
471.67
471.89
471.51
471.12
470.82
469.00
469.64
469.90
469.00
470.00
470.00
470.00
470.00
470.00
471.00
470.00
469.77
469.95
470.12
470.22
469.42
469.59
469.66
469.96
470.07
470.22
469.87
469.29
468.65
468.62
468.74
468.48
468.61
468.00
468.00
468.00
469.00
469.00
Azi
55.92
56.13
54.46
54.91
54.95
56.29
56.20
53.74
53.28
54.21
54.67
52.86
53.24
54.22
53.92
55.01
53.40
54.60
53.91
54.06
54.69
51.98
54.11
54.43
53.39
52.61
54.77
52.87
53.58
55.83
55.25
54.96
53.85
53.76
54.65
55.84
52.76
55.23
54.63
51.13
ASX: BM1
ballardmining.com.au
-
Dip
Dip
54.90
58.97
60.37
59.51
59.89
59.79
58.80
69.59
60.70
59.79
62.46
53.42
59.17
60.76
60.71
60.25
60.13
49.78
60.66
59.60
60.51
60.25
55.48
60.28
60.91
60.40
60.04
60.53
60.50
60.14
60.46
60.82
59.81
60.65
60.16
60.36
60.70
59.98
60.99
59.12
18
Hole ID
DFS332
DFS333
DFS334
DFS335
DFS340
DFS359
DFS360
DFS361
DFS363
DFS367
DFS369
DFS371
Depth
186
240
240
248
258
180
210
192
156
186
228
156
East
252,613
252,597
252,583
252,567
252,582
252,581
252,567
252,555
252,560
252,562
252,531
252,524
North
6,779,345
6,779,334
6,779,324
6,779,313
6,779,348
6,779,442
6,779,433
6,779,425
6,779,455
6,779,484
6,779,463
6,779,483
RL
468.00
468.00
469.00
469.00
468.00
467.72
467.78
467.89
467.48
467.23
467.45
467.25
Azi
56.05
55.45
52.32
52.90
51.60
50.03
55.73
55.96
55.78
54.23
54.90
56.40
ASX: BM1
ballardmining.com.au
-
Dip
60.11
75.80
61.07
60.91
60.16
60.74
58.92
60.11
60.55
59.81
60.30
60.91
19
Appendix C: JORC Code, 2012 Edition
The following table provides a summary of important assessment and reporting criteria used for the reporting of the
Mt Ida Lithium Project Mineral Resource in accordance with the Table 1 checklist in The Australasian Code for the
Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC Code, 2012 Edition) on an ‘if not,
why not’ basis.
JORC Table 1: Section 1: Sampling Techniques and Data
Criteria
Explanation
Sampling
Nature and quality of sampling (eg cut
techniques
channels, random chips, or specific
specialised industry standard
Commentary
•
•
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
•
should not be taken as limiting the broad
meaning of sampling. Include reference
to measures taken to ensure sample
representivity and the appropriate
•
calibration of any measurement tools or
systems used. Aspects of the
determination of mineralisation that are
Material to the Public Report. In cases
where ‘industry standard’ work has been
done this would be relatively simple (eg
•
•
•
‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
•
pulverised to produce a 30 g charge for
Gold sampling activities carried out by Ballard
Mining at the Mt Ida Project include reverse
circulation (RC)and diamond (DD) drilling.
RC samples were collected from a static cone
splitter mounted directly below the cyclone on
the rig; DD sampling was carried out to
lithological/alteration domain with lengths
between 0.3-1.1m
Limited historical data has been supplied,
historic sampling has been carried out by Delta
Lithium, Hammill Resources, International
Goldfields, La Mancha Resources, Eastern
Goldfields and Ora Banda Mining, Hawk
Resources and has included RC, DD, rotary air
blast (RAB) drilling, rock chip and soil sampling.
Sampling of historic RC has been carried out via
riffle split for 1m sampling, and scoop or spear
sampling for 4m composites, historic RAB drilling
was sampled via spear into 4m composites
Historic core has been cut and sampled to
geological intervals
These methods of sampling are considered to be
appropriate for this style of exploration
No records are available on the exact
methodology of historic rock chip / grab /soil
sampling
It is assumed that these were collected and
assayed using industry standard practices
fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information
ASX: BM1
ballardmining.com.au
20
Criteria
Explanation
Drilling
Drill type (eg core, reverse circulation,
techniques
open-hole hammer, rotary air blast,
Commentary
•
auger, Bangka, sonic, etc) and details
(eg core diameter, triple or standard
tube, depth of diamond tails, facesampling bit or other type, whether core
is oriented and if so, by what method,
etc).
Drill sample
Method of recording and assessing core
recovery
and chip sample recoveries and results
assessed. Measures taken to maximise
sample recovery and ensure
representative nature of the samples.
•
•
•
•
•
•
•
Whether a relationship exists between
sample recovery and grade and whether
RC Drilling has been carried out by Orlando
Drilling, Frontline Drilling & PXD, RC drilling
utilised an Explorac 220RC rig, T66 Schramm RC
Rig with a 143 mm face sampling hammer bit, DD
drilling was completed by a truck mounted
Sandvik DE820 and a KWL 1500 and has been a
combination of PQ2, HQ2 and NQ2 diameter.
Diamond tails average 200-300m depth
Historic drilling has been completed by various
companies including Kennedy Drilling, Wallis
Drilling, Ausdrill and unnamed contractors
Historic DD drilling was NQ sized core
It is assumed industry standard drilling methods
and equipment were utilised for all historic
drilling
Sample condition is recorded for every RC drill
metre including noting the presence of water or
minimal sample return, inspections of rigs were
carried out daily
Recovery on diamond core is recorded by
measuring the core metre by metre
Limited sample recovery and condition
information has been supplied or found for
historic drilling
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
Logging
Whether core and chip samples have
•
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies. Whether logging is
qualitative or quantitative in nature.
•
•
•
Core (or costean, channel, etc)
photography. The total length and
percentage of the relevant intersections
logged.
•
•
•
•
Quantitative and qualitative geological logging of
drillholes adheres to company policy and
includes lithology, mineralogy, alteration, veining
and weathering
Diamond core logging records lithology,
mineralogy, alteration, weathering, veining, RQD,
SG and structural data
All RC chip trays, and drill core are photographed
in full
A complete quantitative and qualitative logging
suite was supplied for historic drilling including
lithology, alteration, mineralogy, veining and
weathering
It is unknown if all historic core was oriented,
limited geotechnical logging has been supplied
No historic core or chip photography has been
supplied
Historic comments on logging are very useful in
to verify geological details between lithologies.
Logging is of a level suitable to support Mineral
resource estimates and subsequent mining
studies
ASX: BM1
ballardmining.com.au
21
Criteria
Explanation
Sub-sampling
If core, whether cut or sawn and
techniques and
whether quarter, half or all core taken.
sample
If non-core, whether riffled, tube
preparation
sampled, rotary split, etc and whether
Commentary
•
•
sampled wet or dry. For all sample
types, the nature, quality and
•
appropriateness of the sample
preparation technique.
Quality control procedures adopted for
•
all sub-sampling stages to maximise
representivity of samples.
•
Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for
instance results for field
•
duplicate/second-half sampling.
Whether sample sizes are appropriate to
•
the grain size of the material being
sampled.
•
•
•
•
•
•
DD sampling is undertaken by
lithological/alteration domain to a maximum of
1.1m and a minimum of 0.3m. Core is cut in half
with one half sent to the lab and one half retained
in the core tray
Occasional wet RC samples are encountered;
extra cleaning of the splitter was carried out
afterward
Should over 6 samples in a row be wet, the hole
will be abandoned if it is aimed to be used in an
MRE, with the intention of Diamond tailing it to
retain sample quality.
RC and DD samples have been analysed for Au
by 50g fire assay in the past by ALS, Nagrom, NAL
and SGS, and via photon assay by ALS
Samples analysed by via fire assay at ALS,
Nagrom, NAL and SGS were dried, crushed and
pulverised to 80% passing 75 microns before
undergoing a selected peroxide fusion digest or 4
acid digest with ICPMS finish or fire assay with
ICPMS finish
Samples are now analysed via photon assay at
ALS are dried and crushed to 3mm with 500g of
material utilised for the analysis
An ICP finish is completed post-Photon to
determine values of other analytes ie Cu, As, S
etc)
Ballard have recently amended the Photon
methodology to carry out analysis on Pulverised
material rather than crushed material, studies
suggest the results are comparable.
RC duplicate field samples were carried out at a
rate of 1:20 and were sampled directly from the
splitter on the rig. These were submitted for the
same assay process as the primary samples and
the laboratory are unaware of such submissions
The sampling methodology allows for select
manual duplicates of known graded zones to
improve QAQC
Historic chip sampling methods include single
metre riffle split and 4m composites that were
either scoop or spear sampled, while historic
core was cut onsite and half core sampled
Historic samples were analysed at LLAS,
Genalysis and unspecified laboratories
Historic Au analysis techniques generally
included crushing, splitting if required, and
pulverisation, with aqua regia or fire assay with
AAS finish used to determine concentration
ASX: BM1
ballardmining.com.au
22
Criteria
Explanation
Quality of assay
The nature, quality and appropriateness
data and
of the assaying and laboratory
laboratory tests
procedures used and whether the
technique is considered partial or total.
Nature of quality control procedures
adopted (eg standards, blanks,
Commentary
•
•
•
•
duplicates, external laboratory checks)
and whether acceptable levels of
•
accuracy (ie lack of bias) and precision
have been established.
•
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
•
parameters used in determining the
Samples have been analysed by external
laboratories utilising industry standard methods
The assay methods utilised by ALS, Nagrom, NAL
and SGS for RC chip and core sampling allow for
total dissolution of the sample where required
Photon assay is a non-destructive total analysis
technique
Standards and blanks are inserted at a rate of 1 in
20 in RC and DD sampling, All QAQC analyses
were within tolerance
QAQC reviews are completed on a monthly basis
with any fails being investigated thoroughly in
conjunction with the lab.
All historic samples are assumed to have been
prepared and assayed by industry standard
techniques and methods
Limited historic QAQC data has been supplied,
industry standard best practice is assumed
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Verification of
The verification of significant
sampling and
intersections by either independent or
ass
Share your feedback
Discover